Bluetooth Remote Shutter Guide

Here's a manual for the Bluetooth remote shutter:

Please download user manual from here 👉 PDF GUIDE

Step 1: Turn on the Bluetooth Remote Shutter
Press and hold the button on the Bluetooth Remote Shutter until the LED light starts blinking. This means the device is now in pairing mode.

Step 2: Pair the Bluetooth Remote Shutter with your device
Enable Bluetooth on your device and search for available devices. Select "AB Shutter3" from the list of available devices. If prompted, enter the pairing code "0000" to complete the pairing process.

Step 3: Use the Bluetooth Remote Shutter to take photos
Once the Bluetooth Remote Shutter is paired with your device, you can use it to take photos. Open your camera app and frame your shot. Press the button on the Bluetooth Remote Shutter to take a photo.

Step 4: Use the Bluetooth Remote Shutter to record videos
To record videos, open your camera app and switch to video mode. Frame your shot and press the button on the Bluetooth Remote Shutter to start recording. Press the button again to stop recording.

Step 5: Zoom In/Out
If your device's camera app supports zooming, you can use the Bluetooth Remote Shutter to zoom in and out. Open your camera app and switch to photo or video mode. Press the volume up button on the Bluetooth Remote Shutter to zoom in and the volume down button to zoom out.

Step 6: Turn off the Bluetooth Remote Shutter
To conserve battery life, turn off the Bluetooth Remote Shutter when you're not using it. Press and hold the button on the Bluetooth Remote Shutter until the LED light turns off.

Here are some troubleshooting tips for the Bluetooth remote shutter:

1.    Make sure the Bluetooth Remote Shutter is turned on and in pairing mode. Press and hold the button on the Bluetooth Remote Shutter until the LED light starts blinking.

2.    Ensure that your device's Bluetooth is turned on and that it's in range of the Bluetooth Remote Shutter. If the Bluetooth Remote Shutter is out of range, it won't be able to connect to your device.

3.    Verify that the Bluetooth Remote Shutter is paired with your device. Check your device's list of paired Bluetooth devices to make sure that the Bluetooth Remote Shutter is listed.

4.    If the Bluetooth Remote Shutter is paired but still not working, try resetting the device. To do this, press and hold the button on the Bluetooth Remote Shutter for 10 seconds. The LED light will flash and the device will reset.

5.    Ensure that your device's camera app is compatible with the Bluetooth Remote Shutter. Some camera apps may not be compatible with Bluetooth remote shutters.

6.    If the Bluetooth Remote Shutter is still not working, try replacing the battery. The Bluetooth Remote Shutter uses a CR2032 battery, which is widely available in stores.

7.    Please watch below video