Bluetooth Remote Shutter Guide

🔗 How to Connect the Bluetooth Remote

Step 1: Turn on Bluetooth on Your Phone
Open your smartphone’s Settings, go to Bluetooth, and switch it ON.

Step 2: Activate Pairing Mode on the Remote
Press and hold the power button on the Bluetooth remote for a few seconds until the indicator light starts flashing rapidly.
This means the remote is ready to pair.

Step 3: Pair with Your Smartphone
On your phone, search for available Bluetooth devices.
Select the remote when it appears (it may show as “Selfie” or a similar name).
Follow any on-screen prompts to complete pairing.

Step 4: Test the Connection
Open your phone’s camera app and press the button on the remote.
If the camera clicks or starts recording, the connection is successful.

Step 5: Using the Remote
Once paired, you can use the remote to:

  • Capture photos

  • Start or stop video recording

The remote button works like a camera shutter.

🔧 Bluetooth Remote Troubleshooting Tips

If your Bluetooth remote is not working, try the steps below:

1. Check Power & Pairing Mode
Make sure the Bluetooth remote is turned ON.
Press and hold the button until the LED light starts blinking, indicating pairing mode.

2. Turn On Bluetooth & Check Range
Ensure Bluetooth is enabled on your phone and keep the remote within 1–2 meters for best connectivity.

3. Confirm Bluetooth Pairing
Go to your phone’s Bluetooth settings and check if the remote appears in the paired devices list (it may show as “Selfie” or similar).

4. Reset the Bluetooth Remote
If the remote is paired but not responding, reset it by pressing and holding the button for 10 seconds until the LED flashes.

5. Check Camera App Compatibility
Use your phone’s default camera app. Some third-party camera apps may not support Bluetooth remotes.

6. Replace the Battery
If the issue continues, replace the battery with a CR1632 battery (commonly available).

7. Watch the Video Guide
For visual step-by-step troubleshooting, please watch the video guide below.

🪫How To Replace Bluetooth Remote Battery 

*You need to have CR1632 battery